Hot tag: Wire Mesh Weaving Machine,Wire mesh loom,Crimped Wire Mesh Machine,Wire Mesh Welding Machine,Wire Nail Making Machine

The machine has reasonable design, simple structure, stable operation, good performance, reliable work and convenient maintenance. The machine consists of a main machine, a spring machine, an air compressor, and an oil pump.

The welding machine specifically designed for architectural wire mesh, often referred to as a Wire Mesh Welding Machine or Welding Nets Machine, is a vital piece of equipment in the construction industry.

This wire nail making machine adopts plunger type structure so as to ensure the features such as high speed, low noise and less impact.Especially,it can make the high quality of oil rivet nail and other shaped nails used for high speed welding nailer and nail gun.

The pulley wire drawing machine consists of main reducer motor, mould case, guiding wheel frame and general electrical motor control system. Each pot has JZT series or Y series motor and its own gear combination axis; the machine is drived by gears. The machine can automatically produce different specifications of products. The drawing pot work vertically. The rotational speed increases with the thinning and lengthening of the wire rods.

This equipment is a professional equipment specializing in the production of hexagonal wire netting, its products are widely used in petroleum, construction, farming, chemical industry, heating

Barbed Wire Machine is designed to produce screens with double . Stranded barbed steel wire, thermo-plated with zinc. The machine is of horizontal design, consisting of two parts, assembled together at the middle. It is safe and reliable in operation, capable of turning out high quality products with consistency

Equipment include: uncoiler、punching press、strip coiling 、wire pay-off stand 、forming machine 、razor wire coiling machine 、the blade feeding part

Wire Weaving Machine ZWJ-1300Q/1600Q.Warp and cloth beams of steel tube, with single end drive. But from 1600mm & Q type with double end drive.
Endless cloth beams construction: two PE coating beams and one steel tube can keep the flatting surface of wire mesh and 24hours weaving without any stop. The better weaving range is 40-250mesh with plain weave

Wire Weaving Machine SG-2600DD.Warp and cloth beams of steel tube, with double end drive. The warp beam maybe provided with rings when desired.
Endless cloth beams construction: two PE coating beams and one steel tube can keep the flatting surface of wire mesh and 24 hours weaving without any stop.
Gear Wheel Regulator for accurate mesh adjustment on finest and heaviest weaving. However full PLC control is no need. Servo motor with reducer control mesh size.

Model No. ZWJ-1300QD or 1600QD
Weaving Width: 1300 or 1600mm Maximum 2500mm
Mesh Range: PW: 8-120mesh and WD:300 PLC Control PW: below 250mesh

This type of machine is mainly used for weaving precision metal mesh for special screen printing levels, and can meet the technical requirements of screen printing applications in the electronic and optoelectronic industries.

Fully Automatic Wire Crimping Machine SK20.The wire rack functions as a passive brake disk, capable of controlling stopping but not starting.
It is able to support and rotate a maximum weight of 1200kgs.